RS Star Series
RS485 ANALOG INPUT 0-10V UNIT
SKU: ORS AI010-100R
When a voltage between 0-10VDC is applied at the input, it sends the voltage value to the Gateway via the RS485 line. The Oliptek RS Star Control Units are designed to address various needs and challenges in your facility using the RS485 communication method with their modular structure.
| ORS TEMP-100R | RS845 TEMPERATURE SENSOR NODE | Developed for the DS18B20 Sensor. Its accuracy is ±0.5°C with a measurement range of -55°C/+125°C. | Temperature Measurement |
| ORSDRY100R | RS845 DRY CONTACT NODE | It sends the status information to the Gateway via RS485 line with an "ON" or "OFF" signal depending on whether the input terminals are open circuit or short circuit. | Switches, PLC, Electrical automation systems, etc. |
| ORSDTN105R | RS845 DIGITAL INPUT SVDC NODE | When a voltage of 5-24VDC is applied at the input, it sends an "ON" signal to the Gateway over the RS485 line, and an "OFF" signal in other cases. | PLC |
| ORSDOUT105R | RS845 DIGITAL OUTPUT SVDC NODE | When the Gateway sends an "ON" signal via the RS485 line, it outputs SVDC, and when it sends an "OFF" signal, it outputs OVDC. | PLC |
| ORS DIN-110R | RS845 DIGITAL INPUT 10VDC NODE | When a voltage of 10VDC is applied at the input, it sends an "ON" signal to the Gateway over the RS485 line, and an "OFF" signal in other cases. | PLC |
| ORS DOUT-110R | RS845 DIGITAL OUTPUT 10VDC NODE | When the Gateway sends an "ON" signal via the RS485 line, it outputs 10VDC, and when it sends an "OFF" signal, it outputs OVDC. | PLC |
| ORS AI010-100R | RS845 ANALOG INPUT 0-10V NODE | When a voltage between 0-10VDC is applied at the input, it sends the voltage value to the Gateway over the RS485 line. | All devices capable of producing a 0-10VDC output. |
| ORS AI05-100R | RS845 ANALOG INPUT 0-5V NODE W/5VDC POWER OUT | It sends information from measurement sensors with a 0-5VDC analog data output powered by an SVDC supply to the Gateway via the RS485 line. | LDR, gas sensors, humidity sensors, etc. |
| ORS AIAC-100R | RS845 ANALOG INPUT 220VAC DETECTION NODE | When 110-230VAC is applied at the input, it sends an "ON" signal to the Gateway over the RS485 line, and an "OFF" signal in other cases. | "Motion sensors, UPS, general premises" |
| ORSAO010100R | RS845 ANALOG OUTPUT 0-10V NODE | When a value between 0-10 is sent from the Gateway via RS485, it generates a voltage between 0-10VDC at the output. | "All devices that can be controlled with a 0-10VDC input" |
| ORS DIM3-100R | RS845 3CH CV PWM DIMMER NODE | This is a 3-channel PWM constant voltage DIMMER terminal that can be controlled separately for each channel via the RS485 line from the Gateway, capable of generating a 12-24VDC PWM signal for each channel, with a maximum per channel capacity of 8A. | All devices controlled using the PWM method |
| ORS TRG-103R | RS845 TRIGGER 3SEC. NODE | When an "ON" signal is received from the Gateway via the RS485 line, it shorts the output contact for 3 seconds. Up to 8A. | Devices that operate with triggering such as shutters, doors, etc. |
| ORS REU-100R | RS845 RELAY 1CH NODE 1X8A 230VAC – 30VDC | This is a 1-channel relay terminal that can be controlled separately for each channel via the RS485 line from the Gateway, capable of controlling AC 230V – DC 30V voltages, with a switching capacity of 8A per channel. | All devices requiring power control up to 8A. |
| ORS REL2-100R | RS845 RELAY 2CH NODE 2X8A 230VAC – 30VDC | This is a 2-channel relay terminal that can be controlled separately for each channel via the RS485 line from the Gateway, capable of controlling AC 230V – DC 30V voltages, with a switching capacity of 8A per channel. | All devices requiring power control up to 8A. |
| ORS DIM4-100R | RS845 4CH CV PWM DIMMER NODE | This is a 4-channel PWM constant voltage DIMMER terminal that can be controlled separately for each channel via the RS485 line from the Gateway, capable of generating a 12-24VDC PWM signal for each channel, with a maximum per channel capacity of 8A. | All devices controlled by the PWM method. |
| ORS DIMS-100R | RS845 SCH CV PWM DIMMER NODE | This is a 5-channel PWM constant voltage DIMMER terminal that can be controlled separately for each channel via the RS485 line from the Gateway, capable of generating a 12-24VDC PWM signal for each channel, with a maximum per channel capacity of 8A. | All devices controlled using the PWM method |
| ORS REL8-100R | RS845 RELAY 8CH NODE 8XBA 230VAC – 30VDC. | This is an 8-channel relay terminal that can be controlled separately for each channel via the RS485 line from the Gateway, capable of controlling AC 230V – DC 30V voltages, with a switching capacity per channel of 8A. | All devices requiring power control up to 8A. |
Technical documentation not found.
Document not found.
No stock code information available for this product.
No accessory information available for this product.